ГРУППА ТОВАРОВ:

ПРИСПОСОБЛЕНИЯ ДЛЯ КРЕПЛЕНИЯ ИНСТРУМЕНТА, ПРОЧИЕ (КР. ДЛЯ ТОКАРНЫХ СТАНКОВ) стр 2

ФОРМАТ ВЫВОДА:

СПИСОК СТРАНИЦ:

«	Первая 1 2

ООО "ТехСнабЭкспедиция" .07.2014 Россия

Если Вы заинтересовались, нажмите сюда »

ООО «ТехСнабЭкспедиция» является официальным дилером заводов: ОАО «Гомельский завод станочных узлов», ОАО Станкозавод «Красный Борец», ОАО «СтанкоГомель»:
Головка автоматическая УГ9326
Запчасти к головке автоматической УГ9326
Токарно-винторезный станок ГС526У
Токарно-винторезный станок ГС526УЦ
Радиально-сверлильный станок 2К550В
Радиально-сверлильный станок 2К522-03, ГС545
Станки сверлильные 2Т118, 2Т118-01
Вертикально-сверлильные станки 2Т150
Станок сверлильно-фрезерный ГС520
Вертикально-сверлильные станки 2Т140, 2Т125
Настольно-сверлильные станки ГС2112, ГС2116К
Токарный станок с ЧПУ ГС1750Ф3С1
Станок токарный с ЧПУ 16ГС25СУ1 (с оперативной системой)
Станок плоскошлифовальный с крестовым столом и горизонтальным шпинделем модели
ЗД711АФ10-1 (исп.30, исп.31)
Станок плоскошлифовальный с крестовым столом и горизонтальным шпинделем модели
ЗД711ВФ11 (исп.30, исп.31)
Станок плоскошлифовальный с крестовым столом и горизонтальным шпинделем –
ОШ550, ОШ-400, ОШ-450
Плоскопрофилешлифовальные станки - ОРША-60120, ОРША-60150, ОРША-60200, ОРША-60240
Станок консольно-фрезерный широкоуниверсальный - ОРША-Ф32Ш
Станки точильно-шлифовальные -1 исп.10, ТШ-2 исп.10, ТШ-3, ТШ-4
Станки отрезные - ООС исп.01, ООС исп.10
Горизонтальный консольно - фрезерный станок FW350MR, FW450MR, FU350MR, FU450MR
Вертикальный консольно-фрезерный станок FSS350MR, FSS450MR
Широкоуниверсальный консольно-фрезерный станок мод. FU350MRApUG, FU450MRApUG
Консольно-фрезерные станки с программ. контроллером FSS450TNC,FU450MRApUGTNC
Правильно-отрезной автомат ГД162
Малогабаритный долбежный станок ГД200-01 с механическим приводом

ООО "ТехСнабЭкспедиция" .07.2014 Россия

Если Вы заинтересовались, нажмите сюда »

Головки автоматические универсальные являются узлами токарных станков с различными системами числового программного управления и предназначены для крепления, установки и автоматической индексации режущего и вспомогательного инструмента.

ООО "ТехСнабЭкспедиция" .07.2014 Россия

Если Вы заинтересовались, нажмите сюда »

Фрезерный патрон с набором цанг

R8 (8 цанг от 4 до 16 мм) 9425 руб.с НДС
КМ2 (8 цанг от 4 до 16 мм) 9500 руб.с НДС
КМ3 (8 цанг от 4 до 16 мм) 9600 руб.с НДС
КМ4 (8 цанг от 4 до 16 мм) 9700 руб.с НДС
КМ5 (8 цанг от 4 до 16 мм) 9750 руб.с НДС
ISO 30 (8 цанг от 4 до 16 мм) 9800 руб.с НДС
ISO 40 (8 цанг от 4 до 16 мм) 9800 руб.с НДС
ISO 50 (8 цанг от 4 до 16 мм) 10300 руб.с НДС
R8 (11 цанг от 4 до 25 мм) 9860 руб.с НДС
КМ2 (11 цанг от 4 до 25 мм) 10300 руб.с НДС
КМ3 (11 цанг от 4 до 25 мм) 10400 руб.с НДС
КМ4 (11 цанг от 4 до 25 мм) 10500 руб.с НДС
КМ5 (11 цанг от 4 до 25 мм) 10800 руб.с НДС
ISO 30 (11 цанг от 4 до 25 мм) 11000 руб.с НДС
ISO 40 (11 цанг от 4 до 25 мм) 11000 руб.с НДС
ISO 50 (11 цанг от 4 до 25 мм) 11500 руб.с НДС
КМ2 (12 цанг от 4 до 32 мм) 11900 руб.с НДС
КМ3 (12 цанг от 4 до 32 мм) 12078 руб.с НДС
КМ4 (12 цанг от 4 до 32 мм) 12100 руб.с НДС
КМ5 (12 цанг от 4 до 32 мм) 12150 руб.с НДС
ISO 30 (12 цанг от 4 до 32 мм) 12250 руб.с НДС
ISO 40 (7 цанг от 6 до 25 мм) 12470 руб.с НДС
ISO 40 (12 цанг от 4 до 32 мм) 13500 руб.с НДС
ISO 50 (12 цанг от 4 до 32 мм) 13850 руб.с НДС

ООО «Металлотехника» .07.2014

Если Вы заинтересовались, нажмите сюда »

Патрон резьбонарезной с предохранительными головками
Патроны с хвостовиком по ГОСТ 25827-93 исп.3
ISO 30 DIN 2080 с предохр. головкой М3-12 6864 руб.с НДС
ISO 40 DIN 2080 с предохр. головкой М3-12 6864 руб.с НДС
ISO 40 DIN 2080 с предохр. головкой М14-24 8000 руб.с НДС
Патроны с хвостовиком по ГОСТ 25827-93 исп.2
ISO 30 DIN 69871 с предохр. головкой М3-12 6864 руб.с НДС
ISO 40 DIN 69871 с предохр. головкой М3-12 6864 руб.с НДС
ISO 40 DIN 69871 с предохр. головкой М14-24 8000 руб.с НДС
Патроны с хвостовиком Конус Морзе
КМ2 с предохр. головкой М3-12 6864 руб.с НДС
КМ3 с предохр. головкой М3-12 6864 руб.с НДС
КМ3 с предохр. головкой М14-24 8000 руб.с НДС

ООО «Металлотехника» .07.2014

Если Вы заинтересовались, нажмите сюда »

ООО «ТехСнабЭкспедиция» является официальным дилером таких заводов, как ОАО «Гомельский Завод Станочных Узлов», ОАО Станкозавод «Красный Борец» и ОАО «СтанкоГомель». Предлагаем к поставке следующее оборудование:
Станки радиально-сверлильные: 2К522-03, ГС545, 2К550В
Станки токарно-винторезные: ГС526У, ГС526У-01, ГС526У-02, ГС526УВА-03
Станки настольно-сверлильные: ГС2112, ГС2116К
Головки автоматические: УГ9326-06 и весь спектр запчастей к ним
Станки вертикально-сверлильные: 2Т118, 2Т125, 2Т140, 2Т150
Люнеты к токарным станкам: подвижный 086.23 и неподвижный 086.26
Столы коробчатые к радиально-сверлильным станкам: 2К52-1.0000.011 и 055.0000.010-01
Тиски: ширина губок от 125 мм до 320 мм
Станки токарные с ЧПУ: ГС1725Ф3, 16ГС25СУ
Станки консольно-фрезерные: ОршаФ32Г, ОршаФ32У, ОршаФ32Ш исп. 30,31, FSS350MR, FSS450MR, FSS350MRNC, FSS450MRNC, FU350MR, FU450MR, FU350MRNC, FU450MRNC, FW350MR, FW450MR, , FW350MRNC, FW450MRNC, FU350MRApUG, FU450MRApUG, , FU350MRApUGNC, FU450MRApUGNC.
Станки точильно-шлифовальные: ТШ1*10, ТШ1*20, ТШ1*25, ТШ2*10, ТШ2*20, ТШ2*25, ТШ3, ТШ3*20, ТШ4, ТШ4*01, ТШ4*20
Станки сверлильно-фрезерные: ГС520, СФ-1, СФ-1*07
Станки абразивно-отрезные: ООС*10, ООС*25, ООС*01
Пылесосы к точильно-шлифовальным станкам: 370.П16*04, 370.П16*07
Станки плоскошлифовальные: 3Д711АФ10-1, 3Д711ВФ11 исп.30,31, ОШ-400, ОШ-550 исп.30,31,40,41
Плиты электромагнитные для плоскошлифовальных станков
Приспособления профильного шлифования: для балансировки и правки шлифкруга, столы синусные.
Долбежные станки: ГД200-01
Контактное лицо: Анна, тел. 8(4832)60-70-55, e-mail: solbi5@mail.ru, ICQ 624-103-132

Анна, ООО "ТехСнабЭкспедиция" .10.2014 Россия, Брянск

Если Вы заинтересовались, нажмите сюда »

ООО «Станко-РЭМ» продает по выгодной цене:
Резцедержатель 1П756ДФ313.42
Резцедержатель 1П756ДФ313.43
Резцедержатель 1П756ДФ313.44
Резцедержатель 291.341.121
Резцедержатель 291.341.121А
Резцедержатель 291.341.131
Резцедержатель 291.341.141
Резцедержатель 291.341.151
Резцедержатель 291.341.221
Резцедержатель 291.341.221А
Резцедержатель 291.341.231А
Резцедержатель 291.341.241
Резцедержатель 291.341.251
Резцедержатель 291.342.132
Резцедержатель 291.342.132-01
Резцедержатель 291.342.132-02
Резцедержатель 291.342.132-03
Резцедержатель 291.342.151
Резцедержатель 291.342.222
Резцедержатель 291.342.241
Резцедержатель 291.342.331
Резцедержатель 291.342.351
Резцедержатель РДТ-4П
Резцедержатель УГ0101.600.000
Вся продукция новая.
Гарантия. Скидки.

ООО .05.2014 г. Челябинск

Если Вы заинтересовались, нажмите сюда »

Базовый комплект к головке автоматической УГ9326-06:
Резцедержатель 291.341.121 (хв. 40h6)– 3 шт
Резцедержатель 291.341.221 (хв. 40h6) – 3 шт
Резцедержатель 291.342.132(хв. 40h6) – 1 шт
Резцедержатель 291.342.222 (хв. 40h6) - 1 шт
Производитель: ОАО «БЗСП», г. Барановичи, РБ.

Анна, ООО "ТехСнабЭкспедиция" .10.2014 Россия, Брянск

Если Вы заинтересовались, нажмите сюда »

Головка расточная универсальная б/у в хорошем состоянии для координатно-расточного станка

Анатолий Николаевич .02.2014 Тула

Если Вы заинтересовались, нажмите сюда »

Муфта включения фрикцион 1М63.02.164 - 1000 руб.
- Коромысло 1М63.21.389 - 1200 руб.
- Вал 2-ой оси коробки скоротей в сборе 1М63.21.229СБ - 12000 руб.
- Вал 3-ей оси коробки скоротей в сборе 1М63.21.367 СБ - 15000 руб.
- Вал 4-ой оси коробки скоростей в сборе 1М63 - 14000 руб.
- Шкив главного привода 1М63.163.21.053 - 8000 руб.
- Задняя бабка 1М63.03.003 - 75000 руб.
- Пиноль задней бабки 1М63.03.224 - 8700 руб.
- Винт с гайкой задней бабки 1М63.03.223/224 - 6300 руб.
- Винт поперечной подачи с гайкой 1М63.41.268/04.119 - 14000 руб.
- Суппорт в сборе с резцедержателем 1М63.41.001- 75000 руб.
- Болт резцедержателя 1М63 - 300 руб.
- Винт с гайкой суппорта 1М63 - по цене 8600 руб.
- Фартук в сборе (восст) 1М63.61.001 - 98000 руб.
- Фартук (новый) 1М63.61.001 по цене 154000 руб.
- Гайка маточная 1М63.06.117 по цене 7500 руб.
- Корпус маточной гайки (компл) 1М63 - 12000 руб .
- Реечный вал-шестерня 1М63.61.154 - по цене 6700 руб.
- Рейка комплект (3шт х 715 мм) 1М63.01.150 -14000 руб.
- Насос смазки плунжерный фартука 1М63 - 4200 руб .
- Переключатель крестовый ПК 12-21822, 1М63, 1М64, 1М65 - 3500 руб.
- Шпиндель (новый) 1М63.21.358 - 89000 руб.
- Резцедержатель в сборе с суппортом 1М64 - 98700 руб.
- Резцедержатель 1М64 - 37000 руб.
- Корпус новый задней бабки 1М64 - 60000 руб.
- Винт задней бабки 1М64 - 17800 руб.
- Винт поперечной подачи 1М64- 21000 руб.
- Резцедержатель в сборе с суппортом 1М65 - 108900 руб.
- Механизм передвижения задней бабки 1М65 - 18900 руб.
- Винт поперечной подачи 1М65.41- 21000 руб.

ООО ПКФ "Запчасти к станкам" .02.2014 Россия, Энгельс

Если Вы заинтересовались, нажмите сюда »

- Долбёжная голова 675 - 17000 с НДС
- Долбёжная голова к станку 675 - 19000 тыс. рублей с НДС.
- Фрезерная голова 6Т80Ш - 25000 с НДС

ООО ПКФ "Запчасти к станкам" .02.2014 Россия, Энгельс

Если Вы заинтересовались, нажмите сюда »

ВШГ 1-50х250А 26 587,00руб с ндс
ВШГ 1-50х320А 27 500,00руб с ндс

ВШГ 1-100Х250 57 013,00руб с ндс

ВШГ 1-100х320А 57 750,01руб с ндс

ВШГ 1-125х400А 77 505,99руб с ндс
ВШГ 1-125х500А 79 837,99руб с ндс
ВШГ 1-125х630А 85 217,00руб с ндс
ВШГ 1-125х800А 92 587,00руб с ндс

ВШГ 2-50х250А 25 970,99руб с ндс
ВШГ 2-50х320А 27 049,00руб с ндс

ВШГ 2-100х320А 58 366,00руб с ндс
ВШГ 2-100х400А 59 840,01руб с ндс

ВШГ 2-125х400А 77 989,99руб с ндс
ВШГ 2-125х500А 80 365,99руб с ндс
ВШГ 2-125х630А 85 855,00руб с ндс
ВШГ 2-125х800А 93 621,00руб с ндс

ВШГ 12-40х200А 24 249,50руб с ндс
ВШГ 12-40х250А 25 827,99руб с ндс
ВШГ 12-40х320А 27 225,00руб с ндс

ООО ПКФ "Запчасти к станкам" .02.2014 Россия, Энгельс

Если Вы заинтересовались, нажмите сюда »

- Патрон магнитный 7108-0005 (ф=160мм)- 22 000 руб.с ндс
- Патрон магнитный 7108-0006 (ф=200мм)- 30 900 руб.с ндс
- Патрон магнитный 7108-0007 (ф=250мм)- 32 000 руб.с ндс
- Патрон магнитный 7108-0008 (ф=315мм)- 55 370 руб.с ндс
- Патрон магнитный 7108-0010 (ф=400мм)- 146 500 руб.с ндс
- Патрон магнитный 7108-0003 (ф=125мм)- 16 400 руб.с ндс

ООО ПКФ "Запчасти к станкам" .02.2014 Россия, Энгельс

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-4
Type:Adjustable
Drilling Capacity: Φ2-Φ7.5
Tapping Capacity: M2-M8
Minimum Range:Φ47mm
Maximum Range:Φ115mm

Multi spindle heads are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. PURROS Multi spindle heads are the best method to do drilling and tapping when the holds are close.

This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads, Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.

Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. This can take three to four weeks of time with suitable adapters. They are machined in about two weeks.

Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-3
Type:Adjustable
Drilling Capacity: Φ2-Φ7.5
Tapping Capacity: M2-M8
Minimum Range:Φ32mm
Maximum Range:Φ100mm

Multi spindle heads are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. PURROS Multi spindle heads are the best method to do drilling and tapping when the holds are close.

This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads, Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.

Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. This can take three to four weeks of time with suitable adapters. They are machined in about two weeks.

Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-262
Type:Adjustable
Drilling Capacity: Φ2-Φ7.5
Tapping Capacity: M2-M8
Minimum Range:Φ62mm
Maximum Range:Φ150mm

Multi spindle heads are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. PURROS Multi spindle heads are the best method to do drilling and tapping when the holds are close.

This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads, Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.

Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. This can take three to four weeks of time with suitable adapters. They are machined in about two weeks.

Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-240
Type:Adjustable
Drilling Capacity: Φ2-Φ7.5
Tapping Capacity: M2-M8
Minimum Range:Φ40mm
Maximum Range:Φ130mm

Multi spindle heads are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. PURROS Multi spindle heads are the best method to do drilling and tapping when the holds are close.

This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads, Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.

Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. This can take three to four weeks of time with suitable adapters. They are machined in about two weeks.

Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-228
Type:Adjustable
Drilling Capacity: Φ2-Φ7.5
Tapping Capacity: M2-M8
Minimum Range:Φ28mm
Maximum Range:Φ120mm

Multi spindle heads are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. PURROS Multi spindle heads are the best method to do drilling and tapping when the holds are close.

This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads, Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.

Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. This can take three to four weeks of time with suitable adapters. They are machined in about two weeks.

Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-2
Type:Adjustable
Drilling Capacity: Φ2-Φ7.5
Tapping Capacity: M2-M8
Minimum Range:Φ23mm
Maximum Range:Φ91mm

Multi spindle heads are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. PURROS Multi spindle heads are the best method to do drilling and tapping when the holds are close.

This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads, Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.

Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. This can take three to four weeks of time with suitable adapters. They are machined in about two weeks.

Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-98-2
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-98
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-97
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-96-3
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-96-2
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-96
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-94
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Model: PRMS-92
Type:Fixed
Drilling Capacity: Customized
Tapping Capacity: Customized
Minimum Range: Customized
Maximum Range: Customized

Multi Spindle Drill Heads, which commonly known as porous drill, multi-axis drilling device, multi-axis machine tool or multi-axis head, is a new hole processing equipment. Several or more than twenty holes or threads can be processed one time by a common multi-axis drilling device and an ordinary drilling machine (involves bench drill, vertical drilling, radial drilling, drilling and milling machine, etc.), which can greatly improved the production efficiency of tapping or drilling.

Multi Spindle Heads is widely used in the machinery industry for drilling and tapping of porous parts. For example, porous parts of automobile and motorcycle (such as, Engine box, aluminum casting shell, brake drums, brake discs, steering gears, wheels, differential housing, shaft head, semi-axis, axle, etc.), pumps, valves, hydraulic units, solar accessories and so on.

The spindle quantity and spindle space of Multi Spindle Heads can be adjusted arbitrarily within its processing scope, and several holes can be machined by one time feeding at the same time. When working with hydraulic machine, fast forward, feed (feed back), rewind, stop can all be automatically carried out. Compared with uniaxial drill (tapping), the workpiece can be machined with high precision and efficiency, which can save the human resource as well as material and financial resources for investors, especially the automation of machine tool can greatly reduce the operator's labor intensity. In addition to use of conventional products, special design is available for Multi Spindle Drill Heads according to the product characteristics of customer.

Purros Machinery Co.,Ltd specializes in production and sales of adjustable two-axis, three-axis, and four-axis multi-axis device. Variety of fixed multi - axis device can be made as well.

Taizhou Purros Precision Machinery Co., Ltd .12.2013 China Zhejiang Taizhou

Если Вы заинтересовались, нажмите сюда »

Цанги типа 5С диаметр 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 мм.
Стоимость 400 р. за шт.

ООО "Марта" .12.2013 Санкт-Петербург

Если Вы заинтересовались, нажмите сюда »

Цанги типа ER-16 диаметр 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 мм.
Стоимость 300 р. за шт.

ООО "Марта" .12.2013 Санкт-Петербург

Если Вы заинтересовались, нажмите сюда »

Цанги типа ER-32 диаметр 7, 9, 13, 15, 16, 17, 18, 19, 20-19 мм.
Стоимость 350 р. за шт.

ООО "Марта" .12.2013 Санкт-Петербург

Если Вы заинтересовались, нажмите сюда »

Цанги типа ER-40 диаметр 3-2, 4, 4-3, 5, 6, 7, 8-7, 9-8, 10-9, 11, 12-11, 13, 13-12, 14-13, 15, 15-14, 16-15, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26-25 мм.
Цена 300 р. за шт.

ООО "Марта" .12.2013 Санкт-Петербург

Если Вы заинтересовались, нажмите сюда »

R8 (8 цанг от 4 до 16 мм) 8450 руб.с НДС
КМ2 (8 цанг от 4 до 16 мм) 8600 руб.с НДС
КМ3 (8 цанг от 4 до 16 мм) 8700 руб.с НДС
КМ4 (8 цанг от 4 до 16 мм) 8900 руб.с НДС
КМ5 (8 цанг от 4 до 16 мм) 9000 руб.с НДС
ISO 30 (8 цанг от 4 до 16 мм) 9000 руб.с НДС
ISO 40 (8 цанг от 4 до 16 мм) 8900 руб.с НДС
ISO 50 (8 цанг от 4 до 16 мм) 9250 руб.с НДС
R8 (11 цанг от 4 до 25 мм) 8850 руб.с НДС
КМ2 (11 цанг от 4 до 25 мм) 9250 руб.с НДС
КМ3 (11 цанг от 4 до 25 мм) 9400 руб.с НДС
КМ4 (11 цанг от 4 до 25 мм) 9500 руб.с НДС
КМ5 (11 цанг от 4 до 25 мм) 9700 руб.с НДС
ISO 30 (11 цанг от 4 до 25 мм) 9900 руб.с НДС
ISO 40 (11 цанг от 4 до 25 мм) 9900 руб.с НДС
ISO 50 (11 цанг от 4 до 25 мм) 10350 руб.с НДС
КМ2 (12 цанг от 4 до 32 мм) 10660 руб.с НДС
КМ3 (12 цанг от 4 до 32 мм) 10850 руб.с НДС
КМ4 (12 цанг от 4 до 32 мм) 10880 руб.с НДС
КМ5 (12 цанг от 4 до 32 мм) 11000 руб.с НДС
ISO 30 (12 цанг от 4 до 32 мм) 11050 руб.с НДС
ISO 40 (7 цанг от 6 до 25 мм) 11100 руб.с НДС
ISO 40 (12 цанг от 4 до 32 мм) 12100 руб.с НДС
ISO 50 (12 цанг от 4 до 32 мм) 12400 руб.с НДС

ООО»Металлотехника» .12.2013 Энгельс

Если Вы заинтересовались, нажмите сюда »

Головка предохранительная М3 1600 руб.с НДС
Головка предохранительная М4 1600 руб.с НДС
Головка предохранительная М4 1600 руб.с НДС
Головка предохранительная М6-8 1600 руб.с НДС
Головка предохранительная М8-10 1600 руб.с НДС
Головка предохранительная М10 1600 руб.с НДС
Головка предохранительная М12 1600 руб.с НДС
Головка предохранительная М14 2200 руб.с НДС
Головка предохранительная М16 2200 руб.с НДС
Головка предохранительная М18-20 2200 руб.с НДС
Головка предохранительная М22 2200 руб.с НДС
Головка предохранительная М24 2200 руб.с НДС

ООО»Металлотехника» .12.2013 Энгельс

Если Вы заинтересовались, нажмите сюда »

Патроны с хвостовиком по ГОСТ 25827-93 исп.3
ISO 30 DIN 2080 с предохр. головкой М3-12 6240 руб.с НДС
ISO 40 DIN 2080 с предохр. головкой М3-12 6240 руб.с НДС
ISO 40 DIN 2080 с предохр. головкой М14-24 7280 руб.с НДС
Патроны с хвостовиком по ГОСТ 25827-93 исп.2
ISO 30 DIN 69871 с предохр. головкой М3-12 6240 руб.с НДС
ISO 40 DIN 69871 с предохр. головкой М3-12 6240 руб.с НДС
ISO 40 DIN 69871 с предохр. головкой М14-24 7280 руб.с НДС
Патроны с хвостовиком Конус Морзе
КМ2 с предохр. головкой М3-12 6240 руб.с НДС
КМ3 с предохр. головкой М3-12 6240 руб.с НДС
КМ3 с предохр. головкой М14-24 7280 руб.с НДС

ООО»Металлотехника» .12.2013 Энгельс

Если Вы заинтересовались, нажмите сюда »

Предлагаем магнитные круглые патроны ф 125, 200, 250 и 315мм. Новые, складского хранения в упаковке с паспортом и ключом.

Владиславович .10.2013 Чебоксары

Если Вы заинтересовались, нажмите сюда »

Продаю патроны круглые, магнитные ф 125, 200, 250, 315мм. Новые, с хранения, в упаковке с паспортами!

Оснастка .10.2013 Россия

Если Вы заинтересовались, нажмите сюда »

Силовая фрейзерная головка СГФ 160Н
Цена, прайс, фото по запросу.
Вся продукция новая, с хранения, в работе не была.

ООО Гидроград .10.2013 Ейск

Если Вы заинтересовались, нажмите сюда »

Головка внутришлифовальная ВШГ 12-50-200А
Цена, прайс, фото по запросу.
Вся продукция новая, с хранения, в работе не была.

ООО Гидроград .10.2013 Ейск

Если Вы заинтересовались, нажмите сюда »

ВШГ 12-50х320, ВШГ 12-65х320, ВШГ 12-100х500, ВШГ 12-80х250, ВШГ 12-65х320, ВШГ 12-80х320,
ВШГ 12-80х400, ВШГ 12-80х500, ВШГ 12-100х400, ВШГ 12-100х500, ВШГ 12-100х630,
ВШГ 22-50х320, ВШГ 22-65х320, ВШГ 22-100х500, ВШГ 22-80х250, ВШГ 22-65х320, ВШГ 22-80х320,
ВШГ 22-80х400, ВШГ 22-80х500, ВШГ 22-100х400, ВШГ 22-100х500, ВШГ 22-100х630, ВШГ 22-50х250В,
ВШГ 22-80х320В, ВШГ 22-65х250В.

ООО "Ин-терминус"

Подробнее на нашем сайте и по телефону:(863)240-54-21; (863)218-54-56. Ирина

ООО "Ин-терминус" .08.2013 Россия

Если Вы заинтересовались, нажмите сюда »

СПИСОК СТРАНИЦ:

«	Первая 1 2

Если Вы выберете несколько объявлений, то можете:

Вернуться к списку объявлений